23 – 25 May 2022 | Rotterdam Ahoy

Nordweld TBS hits South America!


The tanks are built by a local company and are 28.3m high and 21m wide with total weight of approx. 210 metric tons. The material used for the tanks is duplex stainless steel LDX 1.4162 with internal surfaces grinded and polished to maximum of Ra0.8.

The steel is provided first from coil (up to 6mm thick) and then from flat sheets (from 7 to 13,5mm thick). Using steel from coil requires only one vertical joint, whereas using flat steel sheets allows to make all the vertical joints, except for the final one, while the circumferential joint of the previous course is being done.

Lift jacks used in Brazil are equipped with Nordweld’s Wheel Trolleys which makes welding of lifting lugs to the shell redundant.

The Tank Building System developed by Nordweld is very efficient as the material is continuously tack welded to the previous course while the material is fed in. As the circumferential joints are plasma welded, tack welding of the course is made with no gaps. For vertical joints manual TIG-welding is being used.