BS&B FlameSaf Limited is a safety company dedicated to protecting industrial plants and personnel from the dangers of explosion and fire propagation. The company’s rich history spans more than 80 years with the BS&B name being well known for its innovative solutions for personal protection against dangerous over pressurizations and explosions within industrial settings. BS&B offers a comprehensive portfolio of products and services that meet and exceed rigorous industry standards for quality and reliability. Our integrated solutions have been time-tested and fine-tuned to deliver maximum value and greater efficiencies to individual engineering processes.

C&D Access are a provider of Engineering, Fabrication, Inspection, Maintenance, Access and Civil Engineering to the Bulk Storage, Petrochemical, Oil and Gas, Renewables and Power Generation industries. We offer one stop turnkey solutions to our Clients, in a safe manner, complying with quality requirements, on time and within agreed budget.

CTS.green is a specialist in the treatment of offgas emissions in the (petro)chemical industry and at terminals. Our services for permanent emission treatment installations include the supply of new installations from the company Dürr, as well as maintenance and service for existing emission treatment installations. We offer solutions that result in minimal NOx emissions from vapor processing, which are many times lower than the prescribed standards. These solutions include conventional RTOs and electric RTOs that have been successfully applied at terminals many times. Additionally, we offer mobile degassing installations under the name Triple D, including mobile RTOs and mobile Flameless Thermal Oxidizers (FTO). The FTO is a new innovation and can be seen as an environmentally friendly alternative to a closed flare. With a much longer residence time, the destruction of vapors can be ensured. Since there is no flame in an FTO, there will be no thermal NOx generated, unlike in a closed flare. This results in NOx levels of 10 mg/m3 or lower. Recently we entered into a partnership with Carbovac, enabling us to offer Vapor Recovery Units for terminals and the related maintenance executed by Luveba. So when loading of barges and tankers is your activity, we can help you out. With the strict emission regulations in the Netherlands, a VRU can have a hard time, especially in the summer. Putting an electrical RTO od Dürr behind the VRU will solve your problem. In this way, CTS.green can help you with permanent and temporary emission reduction solutions. We Care about Clean Air.

Concrete Canvas is a flexible cement impregnated fabric that hardens on hydration to form a thin, durable, water proof and fire proof concrete layer, allowing concrete to be used in a completely new way. CC is a low mass, low carbon geo-textile technology which uses up to 95% less material than conventional concrete for many applications. It is chemically resistant, has good weathering performance and will not degrade in UV, with an expected life of over 120 years. CC can be cut or shaped using hand-tools, and requires a minimal amount of personnel and training to install. In short, Concrete Canvas allows construction and remediation projects in the petrochem sector to be completed with more efficiency and flexibility than traditional concrete solutions. CC Hydro - a Geosynthetic Cementitious Composite Barrier (GCCB) – is a revolutionary containment product, combining the company’s concrete geotextile technology with a chemically resistant geomembrane backing, removing the need for concrete, soil or aggregate top cover, normally required with conventional liner systems.

Crea Construct, founded in 1999, has grown into a leading total partner in the world of fire protection systems. Using clear communication, organization and efficiency, we provide high-quality services to customers in Belgium, the Netherlands and Luxembourg. Our experience in demanding sectors such as (petro)chemicals and oil & gas, together with the necessary technical knowledge, enables us to execute projects from start to finish, regardless of complexity. Customers are supported from initial design to final inspection, with an appropriate long-term maintenance contract. Crea Construct is the perfect partner for the security of your (special risk) project. Happy customers: HES international, ITC Rubis and Rubis Tank Terminal, Vopak, ETT, LBC, Oiltanking, Chevron, Ineos, ATPC and many more!

Cspect is an engineering company based in the port of Ostend that utilizes 'Remote Inspection Techniques' to inspect your assets. We eliminate the need for divers for underwater inspections and remove the necessity of scaffolding, cranes, ladders, drones, rope access, or aerial work platforms for height inspections. To conduct these 'Remote Inspections,' we use remotely operated underwater robots and our revolutionary 'ALTUM telescopic pole.' For height inspections, we have developed the innovative ALTUM telescopic pole. With the ALTUM, UTM measurements (wall thickness measurements) can be performed up to a height of 20 meters, and visual inspections can be conducted up to an impressive 24 meters! This approach marks a significant shift in the execution of UTM and visual inspections, as the cost of the service is significantly reduced. Typical applications include the visual inspection of pipe racks, storage tanks, infrastructure, and wall thickness measurements on storage tanks and silos. For underwater inspections, we use underwater robots capable of performing visual inspections, sonar inspections, high-pressure cleaning, water quality measurements, and steel thickness measurements at depths of up to 200 meters. This method significantly reduces the high risks associated with traditional diver inspections. Moreover, the inspection cost remains highly competitive since we can safely conduct underwater inspections with just one or two inspectors. Typical applications include the inspection of wind turbines, quays, pipelines, locks, sheet piles, ships, pillars, and other underwater structures. Clients: Our clients include BASF, ArcelorMittal, Engie, Jan De Nul, DEME, Parkwind, Norther, C-Power, the Flemish government, and many more.

CTS Netherlands is active in the design, engineering, manufacturing, distribution and installation of the following products and services: Aluminium domes - tank seals - internal floating roofs - tank drain systems - floating suction lines - vapour bladders - integral foam dams - composite hoses - complex rubber hoses - dry break couplings - emergency realease couplers - consultancy and VOC-emission measurements and reporting to support LDAR programs.

Dabico Airport Solutions is a leading Aviation and Process infrastructure solutions company with over 50 years of experience. The company specialises in designing, manufacturing, and delivering high-quality turnkey solutions that aim to make airports, liquid storage facilities, and process plants worldwide more efficient and environmentally friendly. We manufacture liquid handling equipment suitable for marine, road, and rail tanker liquid handling. Dabico’s equipment solutions includes loading arms for road and rail tankers, marine loading systems, folding stairs for loading bays, packaged skid systems, tank sampling systems, and floating suctions for vertical/horizontal storage tanks. Dabico manufactures in our Stockton-on-Tees production facility and is ISO certified to 9001, 14001, and 45001.

composite hose manufacturer

Dexon Technology is a global provider of advanced in-line inspection (ILI) and non-destructive testing (NDT) solutions for oil, gas, and alternative energy pipelines. With over 30 years of experience, Dexon specializes in developing custom ultrasonic ILI systems that deliver some of the highest resolution data for crack, corrosion, and geometry assessment in the industry—helping operators maintain pipeline integrity and optimize asset performance.

Firefighting foams – fluorine free. Founded in 1886 in Hamburg, Dr.STHAMER has since the early 1920s been manufacturing non-fluorinated foam extinguishing agents. The internationally active family owned firm is one of the world's leading firefighting foam agent producers and consultants for the transition towards non-fluorinated foams. Besides its headquarters in Hamburg, it has sales offices in Germany and abroad which offer comprehensive advice on its wide range of products and services. R&D, manufacturing of special extinguishing agents for municipal & industrial fire departments, fixed systems & portable fire extinguishers, all takes place in Hamburg. The services such as consultancy and qualified technical advice, 24-hour emergency service, laboratory tests, product training as well as our strong customer loyalty complete the portfolio.

Eddyfi Technologies provides the most advanced NDT technologies in the world, helping OEMs, asset owners and service companies enhance productivity, save lives, and protect the environment. Its mission is to push the limits of advanced NDT to new heights by featuring various NDT modalities and investing massively in product advancement. Eddyfi Technologies offers a diversified portfolio of NDT sensors, instruments, and software for the inspection of critical components and assets in key industries such as aerospace, oil & gas, and power generation.

ELSONT STORAGE TANK EQUIPMENT Safety. Integrity. Positive relationship. Stewardship. Community involvement. Delivering the best. These core values have forged our reputation for excellence! For more than 30 years, ELSONT has been supplying the oil industry. Decades of expert knowledge and continued contact to operators of tank farms and refineries gives ELSONT the edge over competitors and gain new clients. Based on over 20 years of installation and maintenance experience, ELSONT’s specialised range of equipment is being installed in refineries all over the world. ELSONT is ISO 9001:2000, SCC** and EN1090 certified, and all products are manufactured to strict quality standards. Manufacturing of our products is based in modern facilities in Seoul, Korea and Europe. We strive to reduce product losses through evaporation and maintain product quality with: • Geodesic Dome Roofs • Full Contact Aluminium/SS or GRP made Internal Floating Roofs • Pontoon Type Aluminium Internal Floating Roofs • Pontoon Type Stainless Steel Internal Floating Roofs • Floating Roof Seal Systems • Floating Suction Lines • Oil Skimmers • Floating Roof Rainwater Drainage Systems • Gauge Pole Covers, Leg seals, Special Seal Solutions, a.s.o. Together with you, ELSONT carries out all regulatory requirements and gears your tank up for the demands of the future.