End-of-line armature for venting apertures on tank installations. Tested and approved against atmospheric deflagrations for all materials of the explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 mm and a maximum operating temperature of 60 °C. Used mainly as venting and breather device for fixed roof tanks. Used to prevent inadmissible pressure and vacuum and to minimize unwelcome gas losses or inadmissible emissions respectively. The housing is mounted perpendicularly on a tank roof.

Krautkrämer USM 100 is a revolutionary universal ultrasonic flaw detector that simplifies your inspections, so you can make informed decisions faster. Superior inspection results, a first-class user interface, great ergonomics and robust design, unparalleled connectivity and reporting capabilities, etc. ... make the Krautkrämer USM 100 the most versatile portable ultrasonic flaw detector on the market. Some advantages : • Smartphone-like applications. • A large touchscreen and push buttons that allow seamless two-handed operation. • Remote access, remote data management and remote data storage. • Advanced data recorder with color-coded grid display and an A-scan for each measurement. • A-Scan real-time averaging. • A-scan saturation up to 400%. • Compatible with iOS (App): ability to enrich ultrasound data with photos and geolocation. • Customizable filter settings. • IF Port/3rd Port. • Hot swappable battery. • …

The Krautkrämer USM 36 is an ultra-reliable portable ultrasonic flaw detector for precise results under any conditions. Because of its large 7-inch screen, with an 800x480 pixel resolution it has the largest viewable A-Scan Display in its Class. Signals can be easily viewed and accurately interpreted, even in bright sunlight. The Krautkrämer USM 36 uses the familiar rotary knobs of previous Krautkrämer models. In combination with its simple, intuitive 6-key keyboard this robust portable ultrasonic flaw detector guarantees simple and efficient operation. This versatile instrument is offered in three versions to meet the most standard inspection codes and is fully protected against dust and water ingress to IP66. Krautkrämer USM 36 has proven itself to be a reliable and robust ultrasonic flaw detector performer!

KTN is an accredited inspection body according to EN ISO/IEC 17020:2012 and specialized in performing Non Destructive Testing, advanced and computerized research methods Phased Array and TOFD, pipe and tank inspections (EEMUA), integrity inspections and qualification of welding, in the oil, gas, petrochemical, chemical, pharmaceutical, metallurgy, food, construction, automotive, energy and offshore sectors worldwide. KTN Belgium also offers quality training in the field of NDT and is recognized by Hobéon SKO as an ISO 9712 training and examination center.

We are pleased to introduce our wide range of land loading arms, currently installed and operating all over the world and supported by more than 55 years of experience and research. Our arms are used for a number of fluids such as hydrocarbons, chemicals, hot products, LPG and liquefied gases.

KANON Land Loading Equipment consists of specially designed Land loading arms which are used to fill up the trucks and rail cars from the top or the bottom. Our Top and Bottom loading arms ensure efficient loading/unloading, are adaptable to your particular situation and very easy to use. The Loading arms are supplemented by safety equipment, such as folding stairs and safety cages for a secure work environment and easy access.

Once we have removed the existing structures from your site, we ensure that the land we hand back to you is in the perfect state for redevelopment. Our extensive in-house plant and transport fleet enables us to undertake large remediation projects including bulk excavation and the removal of arisings.

Permanent Protection Where You Can’t Afford a Leak Texplor’s MSS® Leak Monitoring System provides continuous, automated leak detection for secondary containments, tanks (conductive liquids), and basins in the chemical industry. It is a TÜV-accepted alternative to manual inspections, supporting permanent integrity control. EXTEND SERVICE LIFE · SAFEGUARD VALUABLE RESOURCES MSS® operates permanently — integrated into liner systems or installed above and around sealing layers — detecting even minimal leakage at an early stage, before environmental damage or regulatory issues occur. The system is approved by TÜV Nord. LEAK MONITORING FOR TANKS, BASINS & LINERS ➤ Permanent 24/7 sealing integrity control ➤ Instant alarms in case of leakage ➤ Quick installation during maintenance activities ➤ Flexible solutions tailored to each customer’s needs ➤ Scalable for new-build and retrofit projects LEAK MONITORING PRINCIPLE (MSS®) ➤ Electrical source → leak → electrical flow to sensor ➤ Leak localisation within the sensor grid ➤ Explosion-proof operation, suitable for chemical environments PROVEN WORLDWIDE MSS® has been in operation since 2012 with 35+ installations worldwide, including landfill and mining projects. In the chemical industry, flagship deployments are operated at DOW, where automated leak monitoring supports continuous integrity verification of tanks, basins, and liner systems — as a TÜV-accepted replacement for manual inspections. KEY VALUE 🔹 Continuous leak detection for liquid containment systems 🔹 TÜV-accepted monitoring for chemical infrastructure 🔹 Stand-alone or networked system 🔹 Reduced inspection effort and downtime 🔹 Scalable for new-build and retrofit projects

* Continuous on-line monitoring with self-diagnostics. * Certified for operation in hazardous areas. The sensors are Intrinsically Safe. * Proven long-term reliability – Leakwise provides reliable early detection of oil leaks or spills even if the sensor is coated with dirt or oil, or there are variations in water salinity, temperature, liquid level or liquid turbulence. * Easy installation and setup. * Low maintenance – With Leakwise there are no parts to replace and the sensor operates essentially maintenance free over extended periods of time. * Versatility – Leakwise is available in several application-specific models, that can be easily installed in sumps, retaining tanks or other containments. Our company and distributors help customers to select the system that will best fit their application. * Thickness measurement – Leakwise not only detects an hydrocarbon sheen, but can measure the buildup of hydrocarbon layer in the range of 0.3 to 20 mm, 0.3 to 25 mm, 1 to 100 mm, or 1 to 200 mm. * Alarms – Leakwise can initiate visual or audible alarms, messages and controls at set-points that can easily be adjusted. * Controls – Leakwise can activate skimmers, discharge pumps, shutoff or diverting valves, or other containment controls with remote or local relay contacts.

Levelflex FMP55 guided radar with SensorFusion offers the worldwide first combination of the capacitance and guided radar measuring principle in one device. The instrument guarantees safe measured value acquisition even in emulsion layers and issues level and interface layer signals simultaneously. This makes the FMP55 Multiparameter the new standard in interface measurement especially in the oil & gas, chemical and petrochemical industry.

We are your partner for every phase of your project. When selection or developing an industrial production process, we support our customers throughout each phase of the project with know-how, technology and comprehensive solutions. Starting from a general idea, we accompany you through your entire project - from feasibility study & process simulation, laboratory and field testing, basic and detailed engineering, installation and commissioning to a comprehensive after-sales service. Our services at a glance - After sales service, maintenance and trouble-shooting - Plant-specific maintenance contracts and spare part management systems - Maintenance and trouble-shooting of third-party vapour recovery units - 24/7 standby duty for intervention on demand with different reaction time levels - Remote service solution for fault analysis and software adjustment - Installation and commissioning of membrane systems such as VRU, PRU, HRU etc. - Basic and detailed engineering - Process control and visualisation - Operator training - Process development and optimisation - Hazard and operability studies (HAZOP) of BORSIG, third party VRUs and other plants and systems, IPF analysis - Process optimisation of existing plants and systems - Performance tests of BORSIG and third party plants and systems, including emissions and capacity measurement, gas analysis, active carbon analysis - Official emission measurements in co-operation with authorities according to different European standards - Emission reports for refineries and tank farms - Pressure vessel tests in co-operation with authorities

Phasing Out Conventional or Outdated Lighting with the LIGHT-UP Concept The LIGHT-UP concept by Unique Lights offers a structured and phased approach to equipping your entire business location with high-quality LED lighting. Our professional project management and engineering ensure a smooth and efficient transition, fully tailored to your specific business needs. Benefits of the LIGHT-UP concept: ✔️ A long-term plan divided into clear, manageable segments. ✔️ A structured and phased implementation, adapted to your situation. ✔️ Expert project management and technical support throughout the entire process. ✔️ Immediate cost reduction and compliance with sustainability regulations. ✔️ Uniform lighting across your entire location. Upon project completion, your business will be fully equipped with modern LED lighting, contributing to a safer, more efficient, and future-proof work environment. See our added brochure for more detailed information about the LIGHT-UP Concept.

All of LEC’s Lightning Strike Prevention and Protection Systems use charge transfer technology which continually reduces the localized electrostatic charge in the atmosphere so that lightning cannot terminate within the protected area. All lightning prevention devices are part of LEC’s Integrated Lightning Solutions that also include surge suppression and grounding systems, contact us to learn more.

Dabico Airport Solutions is a leading Aviation and Process infrastructure solutions company with over 50 years of experience. The company specialises in designing, manufacturing, and delivering high-quality turnkey solutions that aim to make airports, liquid storage facilities, and process plants worldwide more efficient and environmentally friendly. We manufacture liquid handling equipment suitable for marine, road, and rail tanker liquid handling. Dabico’s equipment solutions includes loading arms for road and rail tankers, marine loading systems, folding stairs for loading bays, packaged skid systems, tank sampling systems, and floating suctions for vertical/horizontal storage tanks. Dabico manufactures in our Stockton-on-Tees production facility and is ISO certified to 9001, 14001, and 45001.