F3 low viscosity special fire extinguishing foam concentrate

With SAVEx .2 multi-turn actuators and SQVEX. 2 part-turn actautors for open-close duty paired with intelligent ACVExC 01.2 actuator controls, the proven AUMA SAEx/SAREx and SQEx/ SQREx range is enhanced by variable speed models. The actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty. Variable speed, explosion-proof for open-close duty

VEGA3 is a batch controller device to be used in measuring systems for liquids other than water (MID MI-005) approved by the Notified Body LNE (France) with the Evaluation Certificate n. LNE-29970. VEGA3 is a flexible, modular and cost-effective system adaptable to different configurations and installation requirements: it can be used for tank-truck/ tanks-trains/ ships loading and unloading, pipelines, in line blending and additives injection and also for LPG liquid and vapour differential measurement.

VEGA T2 is the ultimate solution in terms of electronic preset register for the loading & unloading applications within the oil depots or for custody transfer lines. It can be matched with almost any type of flow meter and, by acquiring the information from optional temperature, pressure and density sensors it can provide a legally relevant measure of the quantity delivered. For this scope VEGA T2 carries an Evaluation Certificate according to OIML R117 (International Organisation of Legal Metrology). At the same time VEGA T2 takes care of the loading procedure, controlling the preset valve and monitoring the signals coming from the devices around it: safety of the operations is therefore granted. Thanks to its extended communication features (serial lines, Ethernet port, Bluetooth compatible peripheral and WiFi connection), VEGA T2 can communicate with the control room, share the delivery information and receive the instructions to operate from a SCADA or TAS. VEGA T2 can generate a printing report directly, with legally relevant functions, and store the data related to the transactions into its memory.

Aager GmbH in Germany is one of the world’s leading suppliers for Industrial Vent and Blow-off silencers. Vent Silencers reduce the noise generated by the expansion of gas or steam from elevated pressures to atmospheric pressure. These absorptive silencers are used to suppress noise generated by high velocity gas streams such as steam vents, safety relief valve outlets, system blow down and purge outlets. This noise can be generated due to the high velocity flow through the valve and turbulence created around any obstacle in the line that suddenly restricts or changes the direction of flow such as valve or an orifice. Our Vent Silencers are completely customizable and allow for either vertical or horizontal orientation. We offer the highest quality acoustically optimised silencers at reasonable prices, anywhere in the world.Industrial Vent and Blow-off silencers can be utilised in a number of industries.

The Vertical Filter Housing (VFH) assembly provides two element options to meet the requirements in the aviation fuel filtration industry: Coalescer/Separator and Microfilter (Prefilter). The VFH system fascinates by high economic efficiency as well as an easy installation. It is designed and constructed for easy element change-out. For use with JET Fuel, AVGAS and MoGas.

The production of industrial tanks involves high-level technologies and skills. There are many parameters to consider; market demands are increasingly pushing for quality, speed, and process economy. IMCAR's long experience in manufacturing tank machines and equipment has allowed the company itself to improve not only the quality of processed products but also the technology of its machinery, all with the purpose of satisfying an increasing range of industries such as food and beverage, petroleum, pharmaceuticals, chemicals, liquid gases up to aerospace, providing appropriate solutions to every need. In the present case, among the cutting-edge IMCAR technologies there is the vertical technology, which allows to reduce the production time and workspace; it lets reach high level of quality, standardization of the product, needing less specialization of employees and reduction in the number of operators involved. Especially, IMCAR Vertical Technology mainly consists of multiple stations plus a series of accessory machines up to a “turnkey” company. One station allows shell shaping, using coils or sheets, thanks to the bending, cutting, welding and welding cleaning processes; the following one allows circumferential welding between roof and shell and between shells through the alignment, welding, compression and welding cleaning processes. All the machines that make up the Vertical Technology are easy to move and adaptable to different workspace in the factory and with the possibility, through specific configurations, to work on site, also allowing the operator to always work safely at the same working height by forming the tank vertically. Customization and development are the basis of every negotiation, sale and post-sale of this type of product as there is no standard, each Installation is something "tailor-made" for the customer, connecting our experience with his requests and knowledge of the final product.

ZCE5 vertical metering unit is designed for road and rail tanker loading stations with top or bottom loading configuration. The ZCE5’s space saving configuration makes for easy installation in smaller facilities and compact pipeline networks. ZCE5 is a ready-to-use device. It comes equipped with filter, air eliminator, PD meter, valve and mechanical or digital register.

Information Operational areas / applications For the safe transport of aggressive, toxic, hot, explosive, valuable and flammable liquids and liquefied gases. Application sectors are tank farms, terminals chemical and off-shore plants, gas accumulators, and industrial plants. In addition to the optimum design for TCN and TCAM pumps there are various mounting options. Model / design TCN Horizontal, sealless spiral housing pumps in process design with completely closed canned motor with radial impeller, single-stage, single-flow. The connection measurements of the housing comply with EN 22 858 / ISO 2858. Model / design TCAM Horizontal, sealless section-type pumps with completely closed canned motor, with radial impellers, multi-stage, single-flow.

Gain insights in terminal planning and plan vessels at dock via one unified overview and platform. Vessel planning supports in reducing unnecessary contacts, streamline decision-making and empowers stakeholders with insights.

*The Vibrating Fork Switch is designed to enable secure point level measurements as well as high and low level alarms to prevent overfill; *The vibrating fork technology realize identify the difference of liquid by resonance principal, resonant period is in proportion to the density of liquid; *When the forks come in contact with a liquid, the resonant period difference between the liquid and air is detected and the device switches and alarms.

In collaboration with the manufacturer Viking Pump, AxFlow presents the 4th generation of the Viking Universal Seal series. These internal gear pumps have been structurally revised and now offer even more flexibility in the modular combination of sizes, sealing options, and flange connections. For more information, follow the external link above.