The SP-PY, SP-PYH, SP-PYU and SP-PYIO liquid detection sensors are single point sensors, and are used in numerous top loading applications such as rail cars and chemical trailers. They provide overfill protection by determining when liquid product has reached a predetermined level in the tank compartment. These sensors are intended for use with Scully control monitors, which incorporate Dynacheck®. Dynacheck® circuitry monitors the sensor, wiring, connections, and its own operation 30 times per second. When a sensor comes in contact with liquid, or if an unlikely fault occurs within the system itself, Dynacheck® signals for the immediate shutdown of the loading operation and/or sounds an audible alarm. The SP–PY, SP–PYU and SP–PYIO sensors are used in unheated liquids. The SP–PYH sensor is used in heated liquids. Each model has an adjustable clamp or coupling depending on its intended use. Scully SP-PY, SP-PYH, SP-PYU and SP-PYIO sensors are portable style units which connect to the rack via a plug and cable. A socket is mounted to the rack for this purpose. They may also be wired directly. They are hung at the rack location or stored elsewhere when not in use. The sensor is inserted into the tank compartment. An adjustable clamp or coupling lets you determine the sensing level and holds the sensor in place in the tank. Scully portable sensors are available in aluminum or stainless steel. Units with connection cables that detach from the rack location are also available. The SP-PY, SP-PYH, SP-PYU and SP-PYIO sensors are compatible with Scully ST-15C series control monitors. SP-PYFU sensors are compatible with Scully ST-35C series & Intellitrol®2 control monitors

PosiWell full‑bore gate valves are innovative due to their patented dual‑expanding discs, full‑bore maximum flow, corrosion‑resistant materials, and low‑friction spring‑loaded design delivering zero‑leakage performance.

We have a lot of experience in the design and production of prefab pump rooms. Of course, we can also build the pump room in a building made available by the customer, but we can also supply a ready-made unit. We ensure that the steel structure of the pump room can fully absorb the forces of the pump. After welding, the steel structure is preserved. Construction of the pump room begins and includes a diamond plate floor and an outer cladding of RF60 sandwich panels. The colors are of your choice, standard in red but other colors are possible.

The Model 3K00 Pressure/Vacuum Vent is designed for use on atmospheric and low-pressure storage tanks where pressure and vacuum relief is required.

This valve offers both pressure & vacuum protection whislt filling and emptying a storage tank, along with the added protection of an intergrated flame arrester, to prevent any external igntion souce entering the tanks vapour space.

Storagetech™ 's Model 140 End of Line, Weight Loaded Pressure Relief Valve is designed to protect the tank from excessive internal pressure during operation. The weighted-loaded pallet and diaphragm assembly is held tightly against a seal to prevent the loss of vapour to atmosphere in the closed position. As the internal pressure in the tank increases, due to product filling or vapour development, the set pressure is reached, accordingly, the diaphragm shall be opened and discharge the gas to atmosphere. When the tank come into normal operation range, the valve shall be seated again. Storagetech Valves Activated as close as to set pressures, less than 10% of set pressures, ensuring accurate pressure management and isolate emission losses perfectly.