Especially developed for use in the chemical and food industry. APPLICATION: • Safe loading and unloading of containers, drums and similar vessels • For loading of bulk materials and flammable fluids • For use in gas and dust hazardous areas of zone 1 (equipment category II 2 G) and 21 (II 2 D) • Controlled derivation of the static electricity • Immediate interruption of the loading operation when unsafe grounding connection consists • According to all currently relevant EMC- and ATEX-standards

Traditional grounding methods and aged grounding systems can be ineffective in high stress situations such as a lightning event. LEC has engineered low-impedance grounding systems that provide effective grounding during high-intensity lightning strikes. All grounding is part of LEC’s Lightning Solutions line. • Retractable Grounding Assembly (RGA) • Chem-Rod® • Ground Test Options • Smart Ground Meter System • Traditional Ground Resistance Test Meters

The Enviro-Sleeve Gauge Pole Seal was designed as a zero-emissions, reliable, durable, and maintenance-free guide pole sleeve that has the capability to be retrofitted without any modifications to the EFR. For a vapor-tight guide pole sleeve that can be installed easily, quickly, and as a custom-fit solution with no maintenance, while lasting the life of your tank, choose the Enviro-Sleeve.

Hallikainen narrow bore viscometers provide a complete solution for automatic analysis of petroleum process streams. The systems offer a choice of transmitters and capillary sizes. Hallikainen narrow bore viscometers meet the requirements both in processing units for control of cut points or quality of blending components, and in finished products to meet quality specifications. ATEX Certified online process viscometer Measures Dynamic Viscosity (cP) of petroleum products Kinematic Viscosity (cSt) can be calculated from measured density data ASTM D445 Narrow Bore Capillary Viscometer (min range: 0-10cP, max range 0-1000cP) Suitable for: Lube oil & fuel oil blending Lube oil de-waxing Kinematic Viscosity (cSt) can be calculated from measured density data Distillate fuel product specification Lube oil specifications

The Hallikainen 1354 is a completely automatic Vapour Pressure Analyser for measuring the Reid Vapour Pressure (RVP – the vapour pressure exerted by a liquid at 37.8°C/100°F) for a wide range of refinery streams. Accurate measurements that correlate with ASTM D323 or D1267 can be made on samples having viscosities up to 80cP at the measurement temperature. The 1354 is unique in that the vapour pressure is directly and continuously measured in a bubble formed in an eductor jet. As such, the device has a continuous output that can be configured to read True Vapour Pressure (TVP) or Reid Vapour Pressure (RVP). The eduction method of measurement means that the analyser has no moving parts giving supreme reliability in a production environment. ATEX Certified Fast, continuous vapour pressure analysis Accurate, reliable absolute pressure measurement ASTM D323 or D1267 Communications – HART, Fieldbus, Modbus Repeatability of 0.1 psi (0.007 bar) Ingress protections IP65 Developed from the original Hallikainen VPA Suitable for use with: LPG Gasoline Naphthas/kerosenes Crude oil Fuel oil

Hallikainen wide bore viscometers provide a complete solution for automatic analysis of petroleum process streams. The systems offer a choice of transmitters and capillary sizes. Hallikainen wide bore viscometers meet the requirements both in processing units for control of cut points or quality of blending components, and in finished products to meet quality specifications. ATEX Certified online process viscometer Measures Dynamic Viscosity (cP) of petroleum products Kinematic Viscosity (cSt) can be calculated from measured density data ASTM D445 & D2170 Wide Bore Capillary Viscometer (min range: 0-500cP, max range 0-3500cP) Suitable for: Lube oil & fuel oil blending Lube oil de-waxing Bitumen product specification Visbreaker feedstock Residual fuels

The Hallikainen 7612 is a completely automatic process stream opacity analyser, for measuring opacity due to ‘dirt and haze’ in a liquid stream. It can operate in a wide range of environmental conditions. This opacity monitor comes with a range of options (see brochure). ATEX Certified opacity analyser In-line stainless steel cell suitable for high process stream temps and pressures Rapid validation facility for quick & simple operational check Fibre optic technology for high precision Differential light absorption unaffected by opacity Single unit installation – no separate safe area controller required Fully adjustable alarm Ingress protections IP65 Suitable for: Monitoring of water in liquid process streams Detection of leaks in large heat exchangers Detection of dirt and haze in sample stream

The Hallikainen 7613 is a completely automatic process stream colour analyser. Standard colour ranges include ASTM D1500-07, Saybolt ASTM D156 and ASTM D1209 (Hazen); custom ranges are also available. It can operate in a wide range of environmental conditions. This colour monitor comes with a range of options (see brochure). ATEX Certified colour analyser In-line stainless steel cell suitable for high process stream temps and pressures Rapid validation facility for quick & simple operational check Fibre optic technology for high precision Differential light absorption unaffected by opacity Single unit installation – no separate safe area controller required Fully adjustable alarm Ingress protections IP65 Suitable for: Fuel monitoring On-line blending Interface detection Custody transfer

Our mobile moisture and corrosion sensor is a completely independent and easy-to-handle tool that can be used in the laboratory or in the field to quickly inspect insulated assets. Place it on a segmented pipeline and it immediately performs a measurement that gives you information about the condition of your insulated asset. On the screen, you will see whether the insulation is wet, the coating has deteriorated or if the pipe is corroding. An inspection with the instrument can be carried out before your yearly maintenance shut-down and shows the actual conditions of your assets. So, maintenance actions can be planned that target only those segments where action is needed to ensure the integrity of the installation/plant. Information from the sensor prevents the removal of intact insulation systems. This reduces your maintenance costs, downtime and material consumption (new insulation after dismantling) on the one hand, and corrosion risks on the other, giving you peace of mind.

Dexon Technology provides in-line inspection services for HDPE pipelines, assessing its integrity for a range of defects, including weld/installation defects, wall thinning, gouging, geometric deformations, and delamination. 👇Read on below to see Dexon's inspection capabilities. The Ultrasonic Rotary (UT-R) Owl delivers ✔️ Accurate sizing of internal & external wall thinning, gouging, & other defects ✔️ Assesses ovality, dents, bulging, buckling ✔️ Tools from 3”–64” (larger custom sizes available) ✔️ Navigates difficult pipeline geometries (1.5D bends, back-to-back bends, bi-directional, mutli-diameter, etc.) ✔️ Highly customizable design for challenging pipelines Dexon brings: ✔️ Over 30 years of inspection experience ✔️ Multiple innovation awards, including for our inspection technology ✔️ Experience inspecting over 500+ pipelines at 6,000+ km ✔️ 93% first run success rate ✔️ 97% final reports delivered on time

Progressive cavity pump in four new compact sizes

Our Western manufactured, carefully selected products are compliant with the highest specifications. Our independent expert advice is tailored to each unique situation. For the high demanding industries ,we serve with best in class brands like Raytec, ATM and Dialight.

Our Western manufactured, carefully selected products are compliant with the highest specifications. Our independent expert advice is tailored to each unique situation. For the high demanding industries ,we serve with best in class brands like Raytec, ATM and Dialight.