Acoustic emission allows the detection of possible tank floor corrosion. It evaluates how serious the corrosion is and locates different sources, without the need to empty and clean the tank.

Satam additive injection and control system is composed of Equalis S controller and one or several AIM (additive injection modules). Equalis S controller is designed to operate as single or multi-point additive injection controller. It is capable of controlling from 1 to 12 additives injection modules (AIM) operating simultaneously or individually in any combination.

TCS offers several methods to achieve accurate, precise additive injection. Each system offers its merits in terms of ease of installation into existing equipment, amount of control, and reporting capabilities.

KANON Service Engineers have specialist knowledge of hydraulics, pneumatics, mechanics and electronics, ensuring a highly efficient and cost effective and safe service

KANON Service Engineers have specialist knowledge of hydraulics, pneumatics, mechanics and electronics, ensuring a highly efficient and cost effective and safe service

In order to continue to guarantee the reliability of the loading arms after a long service life, Kanon loading equipment has set up coherent conversion programs for the overhaul of loading arms. • Complete factory overhaul (Netherlands or Malaysia) • Modifications, including options for a partial overhaul • Containerized workshop for overhaul

In order to continue to guarantee the reliability of the loading arms after a long service life, Kanon loading equipment has set up coherent conversion programs for the overhaul of loading arms. • Complete factory overhaul (Netherlands or Malaysia) • Modifications, including options for a partial overhaul • Containerized workshop for overhaul

Each of AJM’s quick-opening closures is a one-off or custom-made product tailored to our customers‘ requirements. The calculation, selection of materials, design, and final inspection are carried out in consultation with the customers and in accordance with their specifications and the relevant regulations.

The Allentech HC Full Contact IFR is a premium Honeycomb Full Contact Aluminum IFR. The Allentech HC is designed in accordance to API650 and EN14015 with a minimum buoyancy ratio of 2x against the roof dead load plus friction force exerted by perimeter seals using a drag coefficient of no less than 3 lbs/ft. The roof is capable of staying afloat while having two adjacent flotation compartments flooded. The roof buoyancy is based on a Specific Gravity of 0.7 or the stored product, whichever is less. The panel modules are 5ft x 10ft x 1.5in deep (1524mm x 3048mm x 38.1mm). Rim modules are designed to match the tank shell radius. Each sandwich-module consists of a top and bottom layer of .050in aluminum sheet with an internal honeycomb structure to provide stiffness. A high quality aluminum extrusion forms a frame around the sheet and honeycomb, and this is completely seal welded into a fully enclosed buoyant compartment. Each module contains a resealable vapor detection port for pressure testing in our factory, and also for future testing during out-of-service maintenance. Damaged panels that are installed can be easily replaced during future maintenance. Every module is fully inspected and pressure tested with helium leak detection equipment prior to shipment. The Hook and Pin design of the modules allows for quick installation and forms an high strength bolted seam with extremely low seam emission losses.

Alucone ® | Conical roofs Self‐supporting cover for circular shape units up to 20m diameter Highly resistant to corrosion and UV rays Design and calculations supported by specific standards Easy installation Wide range of accessories

Alugreca ® roofs are built from a shaped aluminum sheet with following adventages: Any contour | Fit in circular, square or irregular shapes. Large span | Rangings from 3m to 80 m free span. Opretational access | Total or partially removable for maintenance operations. Low profile | Reducing air volume for odour treatment. Designed according to specific regulations (EUROCODE, national codes,..)

CTS is specialised in manufacturing, supplying and installing free span aluminium dome roofs for storage tanks.

The HMT Aluminum Dome features a clear-span, all-aluminum, lightweight, corrosion-resistant structure which sets a new standard for performance in aluminum domes. HMT’s unique clamped-panel design and attention to detail at critical locations result in a cost-effective solution that provides superior protection of your stored product.

CTS specialized in design, manufacturing, supply and installation of products and systems used in the safe and effective transfer and storage of chemicals and hydrocarbons.